Pycom Beginer

• https://forum.pycom.io/topic/3454/new-development-firmware-updater-1-15-2-b1
• https://software.pycom.io/downloads/linux-1.15.2.b1.html

Depricated For Linux users, you can use the generic firmware update tool and run sudo ./pycom-update. It seems to work for me.

Run as non-root:

  pycom-fwtool

• https://developers.wia.io/docs/pycom-fipy
• Pymakr plugin: search and install

• https://developers.wia.io/docs/pycom-fipy

For Linux, you may need to run the two commands below. Once you've completed that, reboot your computer. This will add permissions that will allow you to upload a sketch to the board.

sudo usermod -a -G tty ${USER}
sudo usermod -a -G dialout ${USER}

 

Using cli (disconnect Atom)

dang@localhost:.../92_pycom/pyupgrade> pycom-fwtool-cli wifi
The port must be specified when using wifi
dang@localhost:.../92_pycom/pyupgrade> pycom-fwtool-cli -p /dev/ttyACM0 pybytes
Running in PIC mode
TOKEN=ca92b5c5-c993-4ee4-bbec-e27862286075
SERVER=mqtt.pybytes.pycom.io
USERID=thuydang.de@gmail.com
NWPREFS=wifi
EXTRAPREFS=[not set]


dang@localhost:.../92_pycom/pyupgrade> pycom-fwtool-cli -p /dev/ttyACM0 wifi
Running in PIC mode
WIFI_SSID=Tdhp
WIFI_PWD=1122334455
WIFI_ON_BOOT=ON

• Updage pybytes FW (see update tool above)
• Create device on Pybytes
• Set device token:

  pycom-fwtool-cli -p /dev/ttyACM0 pybytes --token d9eb4609-6307-4147-87f8-df4615a47220
  

Reflash for any changes (wifi, etc)

sorry, this works just in development, for stable it’s: os.mkfs("/flash")

Benjamin Graf [2:04 PM]

https://github.com/pycom/pymesh_apps/blob/master/custom_fw_bin/FiPy.tar.gz

Android app: https://github.com/pycom/pymesh_apps/tree/master/mobile_app/android

• https://core-electronics.com.au/tutorials/temperature-sensing-pycom-tmp36-tutorial.html